Shelter Assembly Guide
Ensure you have a knife, hammer, glue_bottle (opened), and plenty of wood before starting.
Phase 1: Base Materials
•
Step 1: knife + wood = carved_wood (Repeat until you have 254)
•
Step 2: carved_wood + carved_wood = plank (Repeat until you have 121)
•
Step 3: plank + glue = sticky_plank (Repeat until you have 61)
•
Step 4: sticky_plank + plank = sturdy_plank (Repeat until you have 60)
•
Step 5: knife + carved_wood = shaft (Repeat until you have 12)
•
Step 6: shaft + glue = sticky_shaft (Repeat until you have 12)
Phase 2: Wall Components
•
Step 7: sturdy_plank + sticky_shaft = pegged_plank (12 needed)
•
Step 8: pegged_plank + pegged_plank = shelter_wall_2 (6 needed)
•
Steps 9-16: Progressively add sturdy_plank to your wall sections:
•
shelter_wall_2 → shelter_wall_3 → shelter_wall_4 → shelter_wall_5 → shelter_wall_6 → shelter_wall_7 → shelter_wall_8 → shelter_wall_9.
•
Final Stage: shelter_wall_9 + sturdy_plank = shelter_wall (Repeat until you have 6)
Note: It is faster to finish one shelter_wall completely before starting the next one.
Phase 3: Main Assembly
•
Step 17: shelter_wall + glue = sticky_shelter_wall (2 needed)
•
Requires 3 glue per wall; press T multiple times.
•
Step 18: sticky_shelter_wall + shelter_wall = loose_shelter_wall_half (2 needed)
•
Step 19: loose_shelter_wall_half + hammer = shelter_wall_half (2 needed)
•
Press T multiple times.
•
Step 20: glue + shelter_wall_half = sticky_shelter_wall_half
•
Requires 6 glue; press T multiple times.
•
Step 21: sticky_shelter_wall_half + shelter_wall_half = loose_shelter_walls
•
Step 22: loose_shelter_walls + hammer = wooden_shelter_walls
Phase 4: Final Construction
•
Step 23: shelter_wall + wood = shelter_floor
•
Step 24: glue + wooden_shelter_walls = sticky_shelter_walls
•
Requires 12 glue (3 per side); press T multiple times.
•
Step 25: sticky_wooden_shelter_walls + shelter_floor = roofless_shelter
•
Step 26: glue + roofless_shelter = sticky_roofless_shelter
•
Requires 12 glue; press T multiple times.
•
Step 27: sticky_plank + shelter_wall = shelter_roof
•
Step 28: shelter_roof + sticky_roofless_shelter = loose_wooden_shelter
•
Step 29: loose_wooden_shelter + hammer = wooden_shelter
Note It need to hit by hammer multiple Times.